Get-Mailbox (ExchangePowerShell) (2023)

  • Reference
Module:
ExchangePowerShell
Applies to:
Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

Use the Get-Mailbox cmdlet to view mailbox objects and attributes, populate property pages, or supply mailbox information to other tasks.

Note: In Exchange Online PowerShell, we recommend that you use the Get-EXOMailbox cmdlet instead of this cmdlet. For more information, see Connect to Exchange Online PowerShell.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

Get-Mailbox [-Anr <String>] [-Arbitration] [-Archive] [-AuditLog] [-AuxAuditLog] [-Credential <PSCredential>] [-DomainController <Fqdn>] [-Filter <String>] [-GroupMailbox] [-IgnoreDefaultScope] [-InactiveMailboxOnly] [-IncludeInactiveMailbox] [-Migration] [-Monitoring] [-OrganizationalUnit <OrganizationalUnitIdParameter>] [-PublicFolder] [-ReadFromDomainController] [-RecipientTypeDetails <RecipientTypeDetails[]>] [-RemoteArchive] [-ResultSize <Unlimited>] [-SoftDeletedMailbox] [-SortBy <String>] [-SupervisoryReviewPolicy] [<CommonParameters>]
Get-Mailbox [-Database <DatabaseIdParameter>] [-Arbitration] [-Archive] [-AuditLog] [-AuxAuditLog] [-Credential <PSCredential>] [-DomainController <Fqdn>] [-Filter <String>] [-GroupMailbox] [-IgnoreDefaultScope] [-Migration] [-Monitoring] [-OrganizationalUnit <OrganizationalUnitIdParameter>] [-PublicFolder] [-ReadFromDomainController] [-RecipientTypeDetails <RecipientTypeDetails[]>] [-RemoteArchive] [-ResultSize <Unlimited>] [-SortBy <String>] [-SupervisoryReviewPolicy] [<CommonParameters>]
Get-Mailbox [[-Identity] <MailboxIdParameter>] [-Arbitration] [-Archive] [-AuditLog] [-AuxAuditLog] [-Credential <PSCredential>] [-DomainController <Fqdn>] [-Filter <String>] [-GroupMailbox] [-IgnoreDefaultScope] [-InactiveMailboxOnly] [-IncludeInactiveMailbox] [-Migration] [-Monitoring] [-OrganizationalUnit <OrganizationalUnitIdParameter>] [-PublicFolder] [-ReadFromDomainController] [-RecipientTypeDetails <RecipientTypeDetails[]>] [-RemoteArchive] [-ResultSize <Unlimited>] [-SoftDeletedMailbox] [-SortBy <String>] [-SupervisoryReviewPolicy] [<CommonParameters>]
Get-Mailbox [-Server <ServerIdParameter>] [-Arbitration] [-Archive] [-AuditLog] [-AuxAuditLog] [-Credential <PSCredential>] [-DomainController <Fqdn>] [-Filter <String>] [-GroupMailbox] [-IgnoreDefaultScope] [-Migration] [-Monitoring] [-OrganizationalUnit <OrganizationalUnitIdParameter>] [-PublicFolder] [-ReadFromDomainController] [-RecipientTypeDetails <RecipientTypeDetails[]>] [-RemoteArchive] [-ResultSize <Unlimited>] [-SortBy <String>] [-SupervisoryReviewPolicy] [<CommonParameters>]
Get-Mailbox [-MailboxPlan <MailboxPlanIdParameter>] [-Archive] [-Filter <String>] [-GroupMailbox] [-InactiveMailboxOnly] [-IncludeInactiveMailbox] [-Migration] [-OrganizationalUnit <OrganizationalUnitIdParameter>] [-PublicFolder] [-RecipientTypeDetails <RecipientTypeDetails[]>] [-ResultSize <Unlimited>] [-SoftDeletedMailbox] [-SortBy <String>] [<CommonParameters>]

Description

When you use the Get-Mailbox cmdlet in on-premises Exchange environments to view the quota settings for a mailbox, you first need to check the value of the UseDatabaseQuotaDefaults property. The value True means per-mailbox quota settings are ignored, and you need to use the Get-MailboxDatabase cmdlet to see the actual values. If the UseDatabaseQuotaDefaults property is False, the per-mailbox quota settings are used, so what you see with the Get-Mailbox cmdlet are the actual quota values for the mailbox.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

Get-Mailbox -ResultSize unlimited

This example returns a summary list of all the mailboxes in your organization.

Example 2

Get-Mailbox -OrganizationalUnit Users

This example returns a list of all the mailboxes in your organization in the Users OU.

Example 3

Get-Mailbox -Anr Chr

This example returns all the mailboxes that resolve from the ambiguous name resolution search on the string "Chr". This example returns mailboxes for users such as Chris Ashton, Christian Hess, and Christa Geller.

Example 4

Get-Mailbox -Archive -Database MBXDB01

This example returns a summary list of all archive mailboxes in the database named MBXDB01.

Example 5

Get-Mailbox -Identity ed@contoso.com -RemoteArchive

This example returns information about the remote archive mailbox for the user ed@contoso.com.

Parameters

-Anr

The Anr parameter specifies a string on which to perform an ambiguous name resolution (ANR) search. You can specify a partial string and search for objects with an attribute that matches that string. The default attributes searched are:

  • CommonName (CN)
  • DisplayName
  • FirstName
  • LastName
  • Alias
Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Arbitration

This parameter is available only in on-premises Exchange.

The Arbitration switch specifies whether to return only arbitration mailboxes in the results. You don't need to specify a value with this switch.

Arbitration mailboxes are system mailboxes that are used for storing different types of system data and for managing messaging approval workflow.

To return arbitration mailboxes that are used to store audit log settings or data, don't use this switch. Instead, use the AuditLog or AuxAuditLog switches.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Archive

The Archive switch specifies whether to return only mailboxes that have an archive enabled in the results. You don't need to specify a value with this switch.

(Video) How to get Mailbox usage using PowerShell in Exchange Online #PowerShell #ExchangeOnline

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AuditLog

This parameter is available only in on-premises Exchange.

The AuditLog switch specifies whether to return only audit log mailboxes in the results. You don't need to specify a value with this switch.

Audit log mailboxes are arbitration mailboxes that are used to store audit log settings.

To return other types of arbitration mailboxes, don't use this switch. Instead, use the Arbitration switch.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

-AuxAuditLog

This parameter is available only in on-premises Exchange.

The AuxAuditLog switch specifies whether to return only auxiliary audit log mailboxes in the results. You don't need to specify a value with this switch.

Audit log mailboxes are arbitration mailboxes that are used to store audit log settings.

To return other types of arbitration mailboxes, don't use this switch. Instead, use the Arbitration switch.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

-Credential

This parameter is available only in on-premises Exchange.

The Credential parameter specifies the username and password that's used to run this command. Typically, you use this parameter in scripts or when you need to provide different credentials that have the required permissions.

A value for this parameter requires the Get-Credential cmdlet. To pause this command and receive a prompt for credentials, use the value (Get-Credential). Or, before you run this command, store the credentials in a variable (for example, $cred = Get-Credential) and then use the variable name ($cred) for this parameter. For more information, see Get-Credential.

Type:PSCredential
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Database

This parameter is available only in on-premises Exchange.

The Database parameter filters the results by mailbox database. When you use this parameter, only mailboxes on the specified database are included in the results. You can any value that uniquely identifies the database. For example:

  • Name
  • Distinguished name (DN)
  • GUID

You can't use this parameter with the Anr, Identity, or Server parameters.

Type:DatabaseIdParameter
Position:Named
Default value:None
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DomainController

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Filter

The Filter parameter uses OPATH syntax to filter the results by the specified properties and values. The search criteria uses the syntax "Property -ComparisonOperator 'Value'".

  • Enclose the whole OPATH filter in double quotation marks " ". If the filter contains system values (for example, $true, $false, or $null), use single quotation marks ' ' instead. Although this parameter is a string (not a system block), you can also use braces { }, but only if the filter doesn't contain variables.
  • Property is a filterable property. For more information about the filterable properties, see Filterable properties for the Filter parameter.
  • ComparisonOperator is an OPATH comparison operator (for example -eq for equals and -like for string comparison). For more information about comparison operators, see about_Comparison_Operators.
  • Value is the property value to search for. Enclose text values and variables in single quotation marks ('Value' or '$Variable'). If a variable value contains single quotation marks, you need to identify (escape) the single quotation marks to expand the variable correctly. For example, instead of '$User', use '$($User -Replace "'","''")'. Don't enclose integers or system values in quotation marks (for example, use 500, $true, $false, or $null instead).

You can chain multiple search criteria together using the logical operators -and and -or. For example, "Criteria1 -and Criteria2" or "(Criteria1 -and Criteria2) -or Criteria3".

(Video) Exchange PowerShell Script: Get-MailboxReport.ps1 Demonstration

For detailed information about OPATH filters in Exchange, see Additional OPATH syntax information.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-GroupMailbox

The GroupMailbox switch specifies whether to return only Microsoft 365 Groups in the results. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019, Exchange Online

-Identity

The Identity parameter specifies the mailbox that you want to view. You can use any value that uniquely identifies the mailbox. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Domain\Username
  • Email address
  • GUID
  • LegacyExchangeDN
  • SamAccountName
  • User ID or user principal name (UPN)

You can't use this parameter with the Anr, Database, MailboxPlan or Server parameters.

Type:MailboxIdParameter
Position:1
Default value:None
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-IgnoreDefaultScope

This parameter is available only in on-premises Exchange.

The IgnoreDefaultScope switch tells the command to ignore the default recipient scope setting for the Exchange PowerShell session, and to use the entire forest as the scope. You don't need to specify a value with this switch.

This switch enables the command to access Active Directory objects that aren't currently available in the default scope, but also introduces the following restrictions:

  • You can't use the DomainController parameter. The command uses an appropriate global catalog server automatically.
  • You can only use the DN for the Identity parameter. Other forms of identification, such as alias or GUID, aren't accepted.
Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-InactiveMailboxOnly

This parameter is available only in the cloud-based service.

The InactiveMailboxOnly switch specifies whether to return only inactive mailboxes in the results. You don't need to specify a value with this switch.

An inactive mailbox is a mailbox that's placed on Litigation Hold or In-Place Hold before it's soft-deleted. The contents of an inactive mailbox are preserved until the hold is removed.

To include active and inactive mailboxes in the results, don't use this switch. Instead, use the IncludeInactiveMailbox switch.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online

-IncludeInactiveMailbox

This parameter is available only in the cloud-based service.

The IncludeInactiveMailbox switch specifies whether to include inactive mailboxes in the results. You don't need to specify a value with this switch.

An inactive mailbox is a mailbox that's placed on Litigation Hold or In-Place Hold before it's soft-deleted. The contents of an inactive mailbox are preserved until the hold is removed.

To return only inactive mailboxes in the results, don't use this switch. Instead, use the InactiveMailboxOnly switch.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online

-MailboxPlan

This parameter is available only in the cloud-based service.

The MailboxPlan parameter filters the results by mailbox plan. When you use this parameter, only mailboxes that are assigned the specified mailbox plan are returned in the results. You can use any value that uniquely identifies the mailbox plan. For example:

  • Name
  • Alias
  • Display name
  • Distinguished name (DN)
  • GUID

A mailbox plan specifies the permissions and features available to a mailbox user in cloud-based organizations. You can see the available mailbox plans by using the Get-MailboxPlan cmdlet.

(Video) Connecting to Exchange Online in PowerShell

You can't use this parameter with the Anr or Identity parameters.

Type:MailboxPlanIdParameter
Position:Named
Default value:None
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Online

-Migration

The Migration switch specifies whether to return only migration mailboxes in the results. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019, Exchange Online

-Monitoring

This parameter is available only in on-premises Exchange.

The Monitoring switch specifies whether to return only monitoring mailboxes in the results. You don't need to specify a value with this switch.

Monitoring mailboxes are associated with managed availability and the Exchange Health Manager service, and have a RecipientTypeDetails property value of MonitoringMailbox.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-OrganizationalUnit

The OrganizationalUnit parameter filters the results based on the object's location in Active Directory. Only objects that exist in the specified location are returned. Valid input for this parameter is an organizational unit (OU) or domain that's returned by the Get-OrganizationalUnit cmdlet. You can use any value that uniquely identifies the OU or domain. For example:

  • Name
  • Canonical name
  • Distinguished name (DN)
  • GUID
Type:OrganizationalUnitIdParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-PublicFolder

The PublicFolder switch specifies whether to return only public folder mailboxes in the results. You don't need to specify a value with this switch.

Public folder mailboxes are specially designed mailboxes that store the hierarchy and content of public folders.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-ReadFromDomainController

This parameter is available only in on-premises Exchange.

The ReadFromDomainController switch specifies that information should be read from a domain controller in the user's domain. You don't need to specify a value with this switch.

The command: Set-AdServerSettings -ViewEntireForest $true to include all objects in the forest requires the ReadFromDomainController switch. Otherwise, the command might use a global catalog that contains outdated information. Also, you might need to run multiple iterations of the command with the ReadFromDomainController switch to get the information.

By default, the recipient scope is set to the domain that hosts your Exchange servers.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-RecipientTypeDetails

The RecipientTypeDetails parameter filters the results by the specified mailbox subtype. Valid values are:

  • DiscoveryMailbox
  • EquipmentMailbox
  • GroupMailbox (Exchange 2013 or later and cloud)
  • LegacyMailbox
  • LinkedMailbox
  • LinkedRoomMailbox (Exchange 2013 or later and cloud)
  • RoomMailbox
  • SchedulingMailbox (Exchange 2016 or later and cloud)
  • SharedMailbox
  • TeamMailbox (Exchange 2013 or later and cloud)
  • UserMailbox

You can specify multiple values separated by commas.

Type:RecipientTypeDetails[]
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-RemoteArchive

This parameter is available only in on-premises Exchange.

The RemoteArchive switch specifies whether to return only remote archive mailboxes in the results. You don't need to specify a value with this switch.

Remote archive mailboxes are archive mailboxes in the cloud-based service that are associated with mailbox users in on-premises Exchange organizations.

(Video) How To Find Mailbox Sizes In Exchange Using PowerShell

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ResultSize

The ResultSize parameter specifies the maximum number of results to return. If you want to return all requests that match the query, use unlimited for the value of this parameter. The default value is 1000.

Type:Unlimited
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Server

This parameter is available only in on-premises Exchange.

The Server parameter filters the results by Exchange server. When you use this parameter, only mailboxes on the specified Exchange server are included in the results.

You can use any value that uniquely identifies the server. For example:

  • Name
  • FQDN
  • Distinguished name (DN)
  • Exchange Legacy DN

You can't use this parameter with the Anr, Database, or Identity parameters.

The ServerName and ServerLegacyDN properties for a mailbox may not be updated immediately after a mailbox move within a database availability group (DAG). To get the most up-to-date values for these mailbox properties, run the command Get-Mailbox <Identity> | Get-MailboxStatistics | Format-List Name,ServerName,ServerLegacyDN.

Note: The result from this parameter could be a legacy value before migration. For better results, use the Database parameter instead.

Type:ServerIdParameter
Position:Named
Default value:None
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-SoftDeletedMailbox

This parameter is available only in the cloud-based service.

The SoftDeletedMailbox switch specifies whether to return only soft-deleted mailboxes in the results. You don't need to specify a value with this switch.

Soft-deleted mailboxes are deleted mailboxes that are still recoverable.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online

-SortBy

The SortBy parameter specifies the property to sort the results by. You can sort by only one property at a time. The results are sorted in ascending order.

If the default view doesn't include the property you're sorting by, you can append the command with | Format-Table -Auto Property1,Property2,...PropertyX. to create a new view that contains all of the properties that you want to see. Wildcards (*) in the property names are supported.

You can sort by the following properties:

  • Name
  • DisplayName
  • Alias
  • Office
  • ServerLegacyDN
Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-SupervisoryReviewPolicy

This parameter is available on in on-premises Exchange.

This parameter is reserved for internal Microsoft use.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.

(Video) Exchange 2019:- Get mailbox statistic with PowerShell

FAQs

How do I get all mailbox details in PowerShell? ›

  1. Find the mailbox property that corresponds to the setting you're interested in by running the command Get-Mailbox -Identity "<MailboxIdentity" | Select-Object * to list all the properties of a mailbox. ...
  2. Construct your Office 365 PowerShell command like this: Get-Mailbox -ResultSize unlimited | Where-Object {$_.
Dec 29, 2021

How do I check auto reply in PowerShell? ›

You can use the Get-MailboxAutoReplyConfiguration cmdlet to retrieve all the mailboxes enabled for Automatic Replies. When run, the cmdlet returns Automatic Replies settings for the specified mailbox that include the following: Mailbox identity value.

How do I get-mailbox folder permissions in PowerShell? ›

Use the Get-MailboxFolderPermission cmdlet to view folder-level permissions in mailboxes. Note: In Exchange Online PowerShell, we recommend that you use the Get-EXOMailboxFolderPermission cmdlet instead of this cmdlet.
...
For example:
  1. Name.
  2. Alias.
  3. Distinguished name (DN)
  4. Canonical DN.
  5. Email address.
  6. GUID.

How do I check my mailbox status in PowerShell? ›

In PowerShell there is no separate cmdlet to find out Exchange mailbox size directly as it is considered as apart of mailbox statistics information. Hence, you must use the Get-MailboxStatistics cmdlet to find out the size of a particular mailbox. You can use the -Object <total item size> parameter for the same.

How do I see all mailboxes in Exchange? ›

Navigate to Exchange Server > Mailboxes > General Reports > Mailbox Enabled Users report (for Exchange Server).

How do I get cluster details in PowerShell? ›

Examples
  1. Example 1. PowerShell Copy. PS C:\> Get-ClusterNode Name ID State ---- -- ----- node1 1 Up node2 2 Up node3 3 Up node4 4 Up. ...
  2. Example 2. PowerShell Copy. PS C:\> Get-ClusterNode -Cluster cluster1 Name ID State ---- -- ----- node1 1 Up node2 2 Up. ...
  3. Example 3. PowerShell Copy.

How do you check automatic replies? ›

Testing your Automatic Reply

If you want to test your auto reply, ask someone to email you while the feature is on. Or send an email to yourself from another account outside the organization.

How do I see all PowerShell commands? ›

Enter the name of one command, such as the name of a cmdlet, function, or CIM command. If you omit this parameter, Show-Command displays a command window that lists all of the PowerShell commands in all modules installed on the computer.

How do I get a list of permissions on a directory? ›

Step 2 – Right-click the folder or file and click “Properties” in the context menu. Step 3 – Switch to “Security” tab and click “Advanced”. Step 4 – In the “Permissions” tab, you can see the permissions held by users over a particular file or folder.

How do I get shared mailbox permissions in PowerShell? ›

You can get a list of shared mailboxes permissions using the Get-Mailbox -RecipientTypeDetails SharedMailbox -ResultSize:Unlimited | Get-MailboxPermission command. However, you will probably want to get rid of all “NT AUTHORITY” records by piping the output using Where-Object {($_. user -like '*@*')}.

How do I get a list of permissions from a folder in PowerShell? ›

So, if you want to know the permissions set on all folders in a directory tree, you need to use the Get-ChildItem cmdlet with the -Recurse parameter to list all the folders in the tree and then pass the results to Get-Acl using a ForEach loop.

How do you check if a mailbox is corrupted? ›

You can identify mailbox corruption by observing signs, such as missing mail items, incorrect number of mail items in folders, wrong or no search results, etc. Sometimes the mailbox may also become inaccessible due to corruption and Outlook may fail to connect to the mailbox on the server.

How do I check the status of my mailbox? ›

How to sign up
  1. Go to informeddelivery.usps.com.
  2. Click on “View My Mail.”
  3. If you already have a personal usps.com® account, sign in. If not, create an account.
  4. Once signed in, go to My Preferences. Under Account Management, you will see a box for Informed Delivery. Click “Manage Your Mail.”
Apr 19, 2017

How do I check my Exchange database status? ›

Run the Get-MailboxDatabase cmdlet as given below. With this simple command, you can see all the databases and their mounting status. If the database 'Mounted' status is 'False', it indicates a problem. You can try to mount Exchange database by using the below PowerShell cmdlet.

How do you check what mailboxes a user has access to? ›

Use the Get-MailboxPermission cmdlet to get a list of permissions assigned to a mailbox. Previously, we showed how to manage mailboxes and folders permissions in Exchange/Microsoft 365. Open a PowerShell console and connect remotely to your on-premises Exchange Server or Microsoft 365 (Exchange Online).

How do I get all emails from Exchange Server? ›

On the File tab, click Account Settings, and then click Account Settings. On the E-mail tab, double-click your Microsoft Exchange account. In the Change Account dialog box, drag the Mail to keep offline slider to the desired number of months or to All to synchronize all email messages.

How do I export my Exchange mailbox list? ›

Let's see it in action. Run Exchange Management Shell as administrator. Use the Get-Mailbox cmdlet, including the ResultSize parameter. The output will list only 10 users.
...
Export a list of mailboxes to CSV through PowerShell
  1. DisplayName.
  2. SamAccountName.
  3. PrimarySMTPAddress.
Feb 13, 2021

How do I get technical information in PowerShell? ›

The Get-Help cmdlet displays information about PowerShell concepts and commands, including cmdlets, functions, Common Information Model (CIM) commands, workflows, providers, aliases, and scripts. To get help for a PowerShell cmdlet, type Get-Help followed by the cmdlet name, such as: Get-Help Get-Process .

How do I get metadata from PowerShell? ›

Use the Get-ChildItem cmdlet in PowerShell to get the file specified and use the Format-List * to get the file properties or metadata and display it on the terminal. In the PowerShell script, we used the Get-ChildItem command to get the file object. It then passes the file object Format-List * to get file metadata.

How do you analyze cluster logs? ›

Viewing the cluster. log file using SMIT
  1. Enter smit hacmp .
  2. In SMIT, select Problem Determination Tools > PowerHA SystemMirror Log Viewing and Management > View Detailed PowerHA SystemMirror Log Files and press Enter.
  3. Select Scan the PowerHA SystemMirror for AIX System Log and press Enter.

How do I see all responses in Outlook? ›

View email messages by conversation
  1. From any mail folder, such as your inbox, select View > Show as Conversations to toggle Conversation view on or off.
  2. Select All mailboxes or This folder.

Can I see my automatic replies in Outlook? ›

> View all Outlook settings > Mail > Automatic replies. Select the Turn on automatic replies toggle. Select the Send replies only during a time period check box, and then enter a start and end time.

How do I check auto-reply in Outlook? ›

Try it!
  1. Select File > Automatic Replies. ...
  2. Select Send automatic replies.
  3. If you don't want the messages to go out right away, select Only send during this time range.
  4. Choose the dates and times you'd like to set your automatic reply for.
  5. Type in a message. ...
  6. Select OK.

What is the best auto-reply message? ›

General Auto-Reply Texts

Thank you for reaching out to [Business Name]. We have received your message and will be in touch within [Time Frame]. Hi there! We just wanted to let you know we received your message and will be in touch before our offices close at [Closing Time].

Do automatic replies get sent to mailing lists? ›

Yes, it will. Automatic Replies (Out of Office) are sent to the sender of the incoming email and regardless the source of incoming email. To avoid it, you need to setup a rule to exclude those addresses.

Do automatic replies send multiple times? ›

More Information. The Out of Office Assistant sends an automatic reply to notify users who send you messages that you are away from the office. Your reply is only sent once to a message sender. The count is reset when you toggle the Out of Office Assistant.

What does F8 do in PowerShell? ›

Keyboard shortcuts for running scripts
ActionKeyboard Shortcut
OpenCTRL + O
RunF5
Run SelectionF8
Stop ExecutionCTRL + BREAK . CTRL + C can be used when the context is unambiguous (when there is no text selected).
3 more rows
Oct 25, 2022

How do I get full output in PowerShell? ›

All you have to do is to go to Out-String and add the -Width parameter. Keep in mind that the -Width parameter of Out-File cmdlet specifies the number of characters in each line of output. Any other characters will simply be truncated, not wrapped.

What is the most important PowerShell command? ›

The Top 10 PowerShell Commands That You Should Know
  • Get-Process.
  • Stop-Process.
  • Get-Service.
  • Get-History.
  • Start-Job.
  • ConvertTo-HTML.
  • Out-File.
  • Export-CSV.
Feb 17, 2022

How do you find all the files whose permissions are 777? ›

find /home/ -perm 777 -type f

This command will list all the files inside the home directory with 777 permissions.

How can I get a list of all the subfolders and files present in a directory using PHP? ›

PHP using scandir() to find folders in a directory

The scandir function is an inbuilt function that returns an array of files and directories of a specific directory. It lists the files and directories present inside the path specified by the user.

Which command is used to list and see the permissions of all files? ›

View file permissions

To view the permissions for all files in a directory, use the ls command with the -la options.

How do I give full access to a shared mailbox in PowerShell? ›

Use the Add-MailboxPermission cmdlet to add permissions to a mailbox or to an Exchange Server 2016, Exchange Server 2019, or Exchange Online mail user.
...
You can specify the following types of users or groups (security principals) for this parameter:
  1. Mailbox users.
  2. Mail users.
  3. Security groups.

How do I check shared mailbox permissions? ›

  1. Open Outlook.
  2. In the Navigation Pane, locate the shared mailbox and expand it using the arrow to the left of its name.
  3. Right-click on Inbox and select Properties….
  4. Select the Permissions tab.
  5. Select the individual you wish to modify.
  6. Use the Permissions Level: drop down to select the level of access they should have.

How do I view shared mailbox permissions? ›

To see what permissions you need, see the "Recipients" entry in the Feature permissions in Exchange Online topic.
  1. Open the EAC Exchange admin center.
  2. Go to Recipients > Mailboxes and then click Add a shared mailbox. ...
  3. Fill in the required fields: ...
  4. Click Create to save your changes and create the shared mailbox.
Sep 9, 2022

How do I find a list of all my email addresses? ›

Here's how to access your Gmail contact records from your Gmail account:
  1. Log in to your Gmail account and click on the square-like Google Apps icon on the upper right corner of your Gmail inbox. ...
  2. Click on the Google Contacts icon.
  3. Once you click on the icon, your Gmail contact list page will appear.
Jul 29, 2020

How do I list all shared mailboxes in PowerShell? ›

This can be done by executing the following command in an elevated PowerShell prompt:
  1. Set-ExecutionPolicy -Scope CurrentUser Unrestricted. Copy.
  2. Connect-ExchangeOnline. Copy.
  3. Get-Mailbox -RecipientTypeDetails SharedMailbox -ResultSize:Unlimited | ft Name,WindowsEmailAddress. Copy.

How do I get all properties in PowerShell? ›

Use Get-Member to see an object's properties and methods

The Get-Member cmdlet is used to definitively show us a PowerShell object's defined properties and methods. We use it by piping the output from our Get-Service cmdlet into Get-Member. Note in the sample output below the TypeName value at the top: System.

How do I list all Windows features in PowerShell? ›

To get the windows features and roles available or installed using PowerShell, you need to use the Get-WIndowsFeature cmdlet. That is obvious that Windows features and roles are available only on the server operating systems not on the client operating system.

Videos

1. Basic PowerShell commands for Shared Mailboxes in Exchange Online #Microsoft #PowerShell
(TechTrip)
2. How To Move A Mailbox To A New Database In Exchange Using PowerShell
(TechSnips by ATA Learning)
3. How to create a Shared Mailbox in Exchange Online | Using PowerShell & EAC #Exchange #PowerShell
(TechTrip)
4. How To Manage Resource Mailboxes In Exchange Using PowerShell
(TechSnips by ATA Learning)
5. How To Give A User Access To Another Mailbox In Exchange Using PowerShell
(TechSnips by ATA Learning)
6. How to find/view deleted emails in Exchange Online | Using PowerShell #Microsoft #PowerShell
(TechTrip)
Top Articles
Latest Posts
Article information

Author: Allyn Kozey

Last Updated: 03/15/2023

Views: 6197

Rating: 4.2 / 5 (43 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Allyn Kozey

Birthday: 1993-12-21

Address: Suite 454 40343 Larson Union, Port Melia, TX 16164

Phone: +2456904400762

Job: Investor Administrator

Hobby: Sketching, Puzzles, Pet, Mountaineering, Skydiving, Dowsing, Sports

Introduction: My name is Allyn Kozey, I am a outstanding, colorful, adventurous, encouraging, zealous, tender, helpful person who loves writing and wants to share my knowledge and understanding with you.